STRUCTURAL RESISTANCE: THE LIFTING TEST
The container’s ability to withstand dynamic and static stresses during emptying phases is critical. The test involves loading the container with a ballast mass calculated based on its volumetric capacity.
To ensure a margin of error that covers accidental overloading or material wear, a safety factor of 1.25 is applied relative to the nominal load. During the test, the container is lifted and kept suspended; the structure, lifting points, and floor closing mechanisms must not show any permanent deformations or breakages that could compromise future use or safety.
STRENGTH TESTS FOR HINGES AND STOPS
Even more critical is the test that simulates the extreme stress conditions to which moving components are subjected during discharge. In this scenario, the strength of the end stops and hinges is verified as the bottom opens abruptly under the weight of the waste.
In this configuration, the standard mandates a safety factor of 1.5. The test requires the container floor to be released at the maximum speed permitted by the mechanism, verifying that the stopping elements absorb the kinetic energy without failure. This rigor ensures that, even with particularly heavy or compacted materials, the container remains intact, preventing the risk of falling metal components or the malfunction of closing systems.
CONCLUSIONS AND COMPLIANCE
The adoption of these factors (1.25 for static lifting and 1.5 for the dynamic stress of the stops) ensures that every container placed on the market is capable of handling intensive work cycles in urban environments. For manufacturers, passing the tests required by UNI EN 13071-1:2019 is not only a regulatory obligation but a guarantee of reliability and the prevention of workplace accidents.
CONTACT US FOR MORE INFORMATION
Relying on ECM means choosing an expert technical partner capable of ensuring regulatory compliance.
Contact us to request a personalized quote.
Your Partner in Quality, Safety, and Compliance
The life sciences sector requires specialized knowledge and reliable support. With our broad expertise, we help organizations comply with laws and regulations, ensure quality, and continue to innovate with confidence.
Related services
Related Articles
30 Jun 2026
UPDATED THE LIST OF FAKE/FORGED DOCUMENTS
ECM – Ente Certificazione Macchine is informed of the existence of fakes/counterfeit certificates/laboratory test reports/other ECM documents relating to certain European Directives or International Standards. No one has permission to issue certificates or other documents in our name and on our behalf, so ECM will take action against any companies that issue certificates/documents without authorization.
25 Jun 2026
UPDATED LIST OF IMPROPER USES OF THE NAME ENTE CERTIFICAZIONE MACCHINE SRL AND/OR THE ECM NUMBER OF NOTIFIED BODY 1282
To consult the updated list of reports of misuse of the name Ente Certificazione Macchine srl and/or the notified body number 1282, click here.
22 Jun 2026
The voices of the Memorandum of Understanding (MoU) with the Korea Total Healthcare Ecosystem Association (KoTHEA): Gianluca Baldoni – Internationalization of the regional production system (Emilia-Romagna Region)
As part of the signing of the Memorandum of Understanding (MoU) on May 15, 2026, between ECM – Ente Certificazione Macchine and KoTHEA (Korea Total Healthcare Ecosystem Association), we continue to gather testimonials from the institutions and key partners supporting this important strategic bridge between Italy and South Korea. Today we feature the contribution of Dr. Gianluca Baldoni (Internationalization of the Regional Production System – Attractiveness, Internationalization, and Research Sector; Export and Trade Fair System Area of the Emilia-Romagna Region), who participated in the institutional event held in the presence of local authorities and the Consul General of the Republic of Korea in Milan.
19 Jun 2026
EUDAMED: The Regulatory Turning Point for Medical Devices
May 28, 2026, marked a watershed moment for medical devices in Europe. As of this date, full EUDAMED registration became mandatory for all devices undergoing certification under the MDR and IVDR regulations. The database becomes the operational hub of the single market. This is not a bureaucratic formality, but a binding requirement to maintain market access.
19 Jun 2026
The voices of the Memorandum of Understanding (MoU) with the Korea Total Healthcare Ecosystem Association (KoTHEA): Choi Taeho – Consul General of the Republic of Korea
International ties and strategic development prospects are strengthening around the crucial Memorandum of Understanding (MoU) signed at the Valsamoggia headquarters between the Korea Total Healthcare Ecosystem Association (KoTHEA) and the European notified body Ente Certificazione Macchine (ECM). The official ceremony was graced by the prestigious participation and institutional support of Choi Taeho, Consul General of the Republic of Korea, who emphasized the high political and economic value of this agreement. The agreement represents not only a technical milestone but also a genuine turning point in industrial and regulatory relations along the Seoul-Rome axis, fitting into a rapidly evolving global macroeconomic framework.
18 Jun 2026
New Machinery Regulation, the entry into force approaches: what’s new for Manufacturers
The European regulatory landscape is undergoing a crucial transformation with the introduction of Regulation (EU) 2023/1230, which will permanently phase out the historic Machinery Directive 2006/42/EC. One of the most impactful changes concerns the obligation to integrate cybersecurity as an essential element of product safety.
18 Jun 2026
IMPORTANT NOTICE: Immediate suspension of the use of the product “Hyperbaric chamber”
We would like to inform all our valued customers and business partners of an urgent measure that requires the utmost attention and timely cooperation from all users.